Mobile Hotspot Settings - Kyocera DuraXVLTE

To configure Mobile Hotspot settings (e.g., password, allowed devices, etc.), view this info

  1. From the main screen, select Menu.
    Note Utilize the 5-way navigation pad to highlight and the center button to select.
    5-way Navigation Pad
  2. Select Tools & Settings.
    Select Tools & Settings
  3. Select Settings.
    Select Settings
  4. Select Wireless & networks.
    Select Wireless & Networks
  5. Select Tethering and Mobile Hotspot.
    Select Tethering and Mobile Hotspot
  6. Select Mobile Hotspot.
    Select Mobile Hotspot
  7. Select Mobile Hotspot again.
    Select Mobile Hotspot
  8. Highlight On then select Set to turn on the mobile hotspot.
    Select Set
  9. If prompted, read the info about the mobile hotspot then select OK.
    Select OK
  10. If prompted, read the info about the mobile hotspot using data service then press the left soft key to choose Yes.
    Select Yes
  11. Select Setup Mobile Hotspot.
    Select Set Up Mobile Hotspot
  12. From the Setup Mobile Hotspot screen, configure the following as needed:
    • Network Name
      • Enter a network name.
         Note To hide your connection from other devices, navigate to Hide my device then press left soft key to choose Check.
    • Security
      1. Highlight the Security field then press the left soft key to choose Set.
      2. Highlight an option then select Set:
        • WPA2 PSK
        • Open
    • Password
      1. If preferred, highlight Show password then press the left soft key to choose Check.
        Note Show password is selected when a check mark is present.
      2. Select the Password Field then enter the new password.
        Note Password must be at least 8 characters, see example image below.
        Note The new password must be entered on the connecting device.
    Mobile Hotspot Settings
  13. Select Save.
    Select Save
  14. Press the right soft key to choose Continue.
    Select Continue


Note Check out this interactive demo for more info.