Mobile Hotspot Settings - ZTE Blade™ Vantage

To configure Mobile Hotspot settings (e.g., password, allowed devices, etc.), view this info.

  1. From a Home screen, navigate: Apps Apps icon > Settings.
  2. Tap Tethering & Mobile Hotspot.
  3. Tap Mobile Hotspot settings then select an option:

 

Configure

  1. Tap Configure.
  2. From the Setup Mobile Hotspot screen, configure the following as needed:
    • Network name
    • Channel
    • Security
      • None
      • WPA2 PSK
    • Password
      Note Password can be changed.
    • Show password
      Note Enabled when a check mark is present.
    • Broadcast network name (SSID)
      Note Enabled when a check mark is present.
    • Show Advanced options
      • 802.11 Mode selection (b/g/n)
  3. Tap Save.

 

Top

 

Manage users

  1. To block devices currently connected to your mobile hotspot:
    1. Tap the device name listed under "CONNECTED DEVICES".
    2. Tap BLOCK.
    3. Tap OK.
      Note The blocked device is disconnected from your mobile hotspot.
  2. To add blocked devices while not connected to your mobile hotspot:
    1. Tap Manage users.
    2. Tap Blacklist.
    3. Tap the Menu icon Menu icon (upper-right).
    4. Tap Add to blacklist.
      Note Restricts which devices are allowed to connect.
    5. Enter the MAC address and device name then tap Save.
    6. Repeat steps as necessary. When finished, tap the Back arrow Back arrow (upper-left).
  3. Tap Max connection.
    Note Limits how many devices can be connected at the same time.
    1. Select an option (e.g., 2 Devices, 3 Devices, 10 Devices, etc.).
    2. Tap the Back arrow Back arrow (upper-left).

 

Top

 

Sleep policy

  1. Tap Sleep policy.
    Note Sets how long before the hotspot will turn off after no activity.
  2. Select an option:
    • 5 min
    • 10 min
    • 20 min
    • 30min
    • 60 min
    • Never
  3. Tap the Back arrow Back arrow (upper-left).

 

Top

isTealiumFlag=true