ZTE Blade™ Vantage - Manage Do Not Disturb Settings

Note Notes:

  • The Interruptions feature allows sound/vibration (for phone calls, messages, etc.) to be turned on or off as preferred.
  • Alarms are always considered priority interruptions.

  1. From a Home screen, navigate: Apps Apps icon > Settings > Sound (Device section).
  2. Tap Do not disturb.
    Note To change the Do not disturb setting, follow these steps.
  3. Tap Disturb rules.
    Note Options vary depending on the disturb rule selected (i.e., Priority only, Alarms only, Total silence).
  4. Tap any of the following switches to turn on Switch on or off Switch off.
    • Reminders
    • Events
    • Repeat callers
  5. Tap any of the following then select an option (e.g., From anyone, From contacts only, etc):
    • Messages
    • Calls
  6. To set a schedule, tap any of the following then configure as desired:
    • Days
    • Start time
    • End time
  7. When finished, tap the Back arrow Back icon (located in the upper-left).

Change Do Not Disturb Setting

  1. Swipe down twice from the top of a Home screen.
  2. To change to Do not disturb, tap the current setting (Total silence, Alarms only, Priority only) once. Otherwise, tap twice.
  3. Tap the preferred setting.
  4. Select one of the following:
    • Until you turn this off
    • For one hour
      Note Increase or decrease this time frame using the Add icon or Minus icon icons (located to the right).
  5. Tap DONE (located in the lower-right).