Configure Transmit Power - 4G LTE Network Extender 2

Adjust setting manually only if directed.

Note Notes:

  • 4G LTE Network Extender transmit power is automatically adjusted based on macro network signal strength
  • The PC must have Internet Explorer 9 & above to access the web interface.


  1. Access the Network Extender Admin then click Settings Settings icon (on the left).
    Note For assistance, refer to Access Network Extender Admin.
  2. From Settings click Advanced.
  3. From 'Transmit Power', adjust the slider to the preferred level then click Save (bottom of screen).
  4. From the settings modification performance impact warning click OK.
    Note Adjust setting manually only if directed.
    Settings Advanced Transmit Power warning