moto e5 play - Set Up Fingerprint Recognition

Note Notes:

  • A fingerprint is utilized to unlock the device.
  • For the fingerprint scanner to operate, hands must be clean and free of moisture, dirt, oil, lotion, dyes, etc.
  • Up to five fingerprints can be registered on the device.

  1. From a Home screen, swipe up to access all apps.
  2. Navigate: Settings Settings icon > Security & Location Security & Locations Settings Icon.
  3. From the Device Security section, tap Fingerprint.
  4. Tap NEXT.
    Note If presented, enter the current PIN, password or pattern.
  5. If presented with an 'Unlock selection' screen, select a backup lock option:
    Note Refer to Set Up Screen Lock for assistance.
    • Fingerprint + Pattern
    • Fingerprint + Pin
    • Fingerprint + Password
  6. If presented with the 'Secure start-up' screen, select an option:
    • NO
    • YES
  7. If presented with the 'Notifications' screen, select an option, then tap DONE:
    • Show all notifcation content
    • Hide sensitive notification content
    • Don't show notifications at all
  8. Locate the fingerprint sensor below the display then tap NEXT (lower-right).
  9. Review the info then tap NEXT.
  10. Place your finger on the sensor until it vibrates then lift.
    Note Repeat this step as necessary until the process is complete.
    Note For greater accuracy, finger placement should vary slightly each time.
  11. Tap DONE

Related Topics: