moto g6 - Add Additional Fingerprints

Note Notes:

  • A fingerprint is utilized to unlock the device.
  • For the fingerprint scanner to operate, hands must be clean and free of moisture, dirt, oil, lotion, dyes, etc.
  • Up to 5 fingerprints can be registered on the device.

  1. From a Home screen, tap the Arrow icon Up arrow icon to access all apps.
  2. Navigate: Settings Settings icon > Security & Location Security icon.
  3. From the Device security section, tap Fingerprint.
    Note If presented, enter the current PIN, password or pattern.
  4. Tap Next.
  5. Choose any of the following then follow the prompts to establish a backup Pattern, PIN or Password:
    • Fingerprint + Pattern
    • Fingerprint + PIN
    • Fingerprint + Password
  6. From the Notifications screen choose one of these options then tap Done:
    • Show all notification content
    • Hide sensitive notification content
    • Don't show notifications at all
  7. Tap Next then tap Next again.
  8. Place your finger on the sensor until it vibrates, then lift.
    Note Repeat this step as necessary until the process is complete.
    Note For greater accuracy, finger placement should vary slightly each time.
  9. Tap Next (lower-right).
  10. Tap Got it.

Related Topic: Remove Saved Fingerprints