5G Home Internet - My Verizon app - Connect Using WPS

5G Home Internet service is currently offered in specific areas; click here to check for 5G coverage availability.

Note Notes:

  • Ensure your app is up to date as the following steps apply to the most recent version.
  • The My Verizon app is only available for Android™ devices running 4.0 or higher and Apple® iOS devices running 10.0 or higher. For all other devices, visit verizonwireless.com to sign in and manage your account.
  • Available settings vary based on user type (e.g., Account Owner, Account Manager, Account Member).


Wi-Fi Protected Setup (WPS) allows wireless devices to be added without having to enter any wireless settings (network name, password, etc.).

  1. From the Home screen tap the My Verizon app or navigate: Apps > My Verizon.
  2. Tap the Menu icon Menu icon (upper-left) then tap Devices.
  3. Under 'My Wi-Fi Router' tap Manage.
  4. From the Smart Devices tab, tap Add Device (below the connected device list).
    Note Viewing all devices may require scrolling down.
    My Verizon app Smart Devices tab add Device via WPS
  5. Tap Start then press the WPS button on the device you wish to connect.
    Note The connection remains open for 2 minutes.
    Add Device via WPS click Start
  6. When 'Connection Successful' is shown, tap Close.
    Note If an error message is shown, you can tap Start to try again.


Note For additional info on the My Verizon app, check out these FAQs.