Add a WPS Client - Verizon 5G Home Wi-Fi Extender

Verizon 5G Home service is currently offered in specific areas; click here to check for 5G coverage availability.

Note Notes:

  • You can also connect using WPS from your My Verizon app.
  • WPS must be enabled from the Admin to use WPS.
  • Wi-Fi Protected Setup (WPS) allows new wireless clients (devices) to be added without having to enter any wireless credentials (network name, password/key); the wireless client must support WPS.

External
Admin WebGUI

External

  1. From the back of the extender, locate the WPS button.
    Verizon 5G Home Wi-Fi Extender rear panel with port and button details
  2. Press the WPS button for at least 2 seconds to start the pairing process.
    Note The WPS indicator LED on the back blinks slow blue for two minutes before the WPS setup process is timed out.
    Note The WPS indicator LED on the back blinks fast blue if there is a pairing error. Refer to LED Status Indicators as needed.

Top

Admin WebGUI

  1. Sign in to the Admin WebGUI.
    Note You must be connected to the extended network to access the admin page.
  2. From the Extended Network panel, click the Arrow icon Right arrow icon.
    Verizon 5G Home Wi-Fi Extender Home screen
  3. From Extended Network, click the WPS tab.
    Note Ensure the WPS switch is in the on On switch icon position.
    5G Home Wi-Fi settings with emphasis on Network Settings
  4. From WPS, click the WPS button to start the pairing process.
    Note Alternatively, enter the PIN from a WPS enabled device then click Enter.
    Note The WPS indicator LED on the back blinks slow blue for two minutes before the WPS setup process is timed out.
    Note The WPS indicator LED on the back blinks fast blue if there is a pairing error. Refer to LED Status Indicators as needed.

Top

isTealiumFlag=true