Verizon Jetpack® MiFi® 8800L - LAN Settings

View this info to configure advanced LAN settings (e.g., IP address, Subnet mask, DHCP address range, etc.) for your Jetpack.

Caution Changing advanced settings may be harmful to the stability, performance, and security of the Jetpack. Contact your local IT admin prior to altering any of these settings.

  1. Access the Admin Web Interface.
  2. Click Jetpack Settings.
  3. Click the Advanced tab, review the warning then click Continue.
  4. Click LAN (located below the Advanced tab).
  5. From the IPv4 section, enter the desired info into the following fields:
    • IP address
    • Subnet mask
    • MAC Address
    • Turn on DHCP server
      Note On when a check mark is present.
    • DHCP lease time
    • Start DHCP address range at
  6. From the IPv6 section, click Turn on IPv6 to turn on or off.
    Note On when a check mark is present.
  7. Click Save Changes.