Verizon Jetpack® MiFi® 8800L - MAC Filtering

Caution Caution:

  • MAC Filter is an advanced feature. Contact your local IT administrator prior to altering this setting.
  • If turned on, only the devices added to the MAC address filter list can access the jetpack's Primary Wi-Fi network.
  • This MAC filter has no effect on the Guest Wi-Fi network or USB devices.


  1. Access the Admin Web Interface.
  2. Click Jetpack Settings.
  3. Click the Advanced tab, review the warning then click Continue.
  4. Click MAC Filter (located below the Advanced tab, to the right).
  5. To add a device to the list, do the following:
    Note By default, any device that has previously connected to the jetpack already appears in the list.
    1. Click Add new device (located in the lower-left).
    2. Configure/enter the following:
      • Name
      • MAC Address
  6. Click Save Changes (located in the lower-right).
  7. To turn on MAC filtering, do the following:
    1. Select (check) the MAC Address Filter option located to the right of the corresponding device(s).
    2. Click Save Changes (located in the lower-right).
    3. Tap the MAC Filter switch to turn on.
    4. Tap Confirm.