Verizon Jetpack® MiFi® 8800L - Add a WPS Device

Note Notes:

  • WPS must be enabled from the Admin to use WPS.
  • Wi-Fi Protected Setup (WPS) allows new wireless clients (devices) to be added without having to enter any wireless credentials (network name, password/key); the wireless client must support WPS.

 

Device
Admin WebGUI

 

Device

  1. From the Home screen, tap Menu (lower-left).
    Note If necessary, press the Power button (top-right edge) to turn on the display.
  2. Tap Wi-Fi.
  3. Tap Wi-Fi Protected Setup (WPS).
  4. Tap 'Primary Network WPS' or 'Guest Network'.
  5. Tap one of the WPS connection options:
    • Use WPS button
    • Enter PIN
  6. Press the WPS button on the device you wish to connect for at least 2 seconds to start the pairing process.
    Note If 'Enter PIN' was selected, enter the PIN on the device you wish to connect.

 

Top

 

Admin WebGUI

  1. Sign in to the Admin WebGUI.
    Note You must be connected to the network to access the admin page.
  2. Click Wi-Fi.
  3. Click the Primary Network or Guest Network tab then click the WPS checkbox to allow or disallow WPS connections.
  4. Follow steps above to connect from the Device.

 

Top

isTealiumFlag=true