moto e5 go - Insert SIM Card

Caution Don't attempt to insert the SIM card while the device is powered on. Doing so may harm the SIM card and/or the device.

  1. Ensure the device is powered off.
  2. Using the notch (bottom corner), gently lift and remove the battery cover.
    Battery cover removal
  3. From the notch in lower edge of the battery compartment, lift and remove the battery.
    Remove the battery
  4. With the gold contacts facing down, align the card (angled edge first) then slide the SIM card in.
    Inserting SIM card
  5. If necessary, with the gold contacts facing down slide SD card into the slot.
  6. Insert the battery.
    Note Ensure the connectors on the battery align with the connectors on the device.
    Insert the battery
  7. Align the battery cover then gently press to snap the cover into place.
    Replace battery cover


Note Check out this interactive demo for more info.

Related Topic: Remove SIM Card