4G LTE Network Extender for Enterprise 2 - Wired Connection - LMT Port

The 4G LTE Network Extender for Enterprise 2 is an advanced business solution that's not available for consumer use.

Note Notes:

  • The Network Extender is designed to be plug-and-play on most networks; the configuration console allows for custom functionality.
  • The PC must have Internet Explorer 9 or above to access the web Interface.
  • Configuration console links to external resources are not available while connected via the LMT port.

 

  1. From the connection side of the Network Extender, connect the supplied Ethernet cable from the Network Extender LMT Port to an available Ethernet port on the computer.
    Wired connection to LMT Port
  2. Open Network Connections.
    Note Navigate: Start > (Settings if present) > Control Panel > View network status and tasks (Network and Sharing Center if present) > Manage network connections.
    Note Alternatively Navigate: Start > Run, enter 'CMD' then press the Enter key > Enter 'NCPA.CPL' then press Enter.
    Note Alternatively Navigate: Start > Run, enter 'CMD' then press the Enter key > Enter 'CONTROL NETCONNECTIONS' then press Enter.
  3. Right-click Local Area Connection then click Properties.
    Note Alternatively, right-click on Ethernet connection then click Properties.
  4. From the General tab, ensure 'Internet Protocol Version 4 (TCP / IPv4)' is selected then click Properties.
  5. Ensure 'Use the following IP address' is selected, enter the following settings then click OK.
    IP Address
    192.168.32.28
    Subnet mask
    255.255.255.0
    Warning Typically the setting must be changed back to 'Obtain an IP address automatically' to get back onto your company's network or any network that requires DHCP.
  6. Launch a web browser then navigate to https://192.168.32.27.
    Note If presented with a security certificate message, click Continue to this website to access the configuration console.
  7. From the Network Extender configuration console, click Sign In Sign in/out icon (upper-right)
  8. Enter the admin password then click Sign In.
    Note Default password: enterpriseFemt0 (zero at end) and is case sensitive.
isTealiumFlag=true