Alcatel GO FLIP™ V - Insert SD / Memory Card

Note This device supports microSD (TransFlash) memory cards, which can be purchased from any Verizon store or at the online store.

  1. Ensure the device is powered off.
  2. Remove the battery cover.
    Note With the phone facing down, insert your fingernail into the cutout located on the bottom corner of battery cover to lift and remove.
    Locate cutout
  3. Utilizing the notch, lift then remove the battery.
    Use notch to remove battery
  4. With the gold contacts facing down, insert the memory card. Once the card is fully inserted, the latch will automatically lift and hold it in place.
    Note If needed, press down on the latch to insert the card.
    Insert sd / memory card
  5. Insert the battery. 
    Note Ensure the three arrows are pointing to the bottom of the device and the gold contacts line up then press down gently to secure.
    Insert Battery
  6. Replace the battery cover. 
    Note Press down along the edges to lock into place.
     

 

Related Topic: Remove SD / Memory Card

isTealiumFlag=true