ZTE Blade™ Vantage 2 - Remove SD / Memory Card

Caution Don't remove the SD / memory card with the device powered on because it may harm the card and/or the device.

  1. Ensure the device is powered off.
  2. Remove the battery cover.
    Note Using the provided slot (at the corner edge), carefully lift then detach the cover.
    Remove battery cover
  3. Remove the SD / Memory Card from the phone.
    Note If applicable, refer to Insert SD / Memory Card.
    Remove SD card
  4. Align the battery cover then gently press to snap the cover into place.
    Replace battery cover
  5. Press the cover onto the phone around all edges to fully secure.
    Secure battery cover

 

Note This device supports microSD memory cards which can be purchased from any Verizon store or the online store.

isTealiumFlag=true