LED Status Indicators - Verizon Wireless 3G Network Extender - 1X / EvDO / Business

LED State Power System GPS WAN
Solid red N / A Waiting for DNS query for Security Gateway access to be resolved.
(During system initialization)
Position fix not yet attained and no satellites have been acquired.
(During system initialization)
Ethernet cable plugged-in properly but Local IP address not yet obtained.
Solid blue Power supply to the Network Extender is proper. Successfully registered with the core network and RF is enabled. Position fix attained and GPS function providing accurate timing. Local IP address obtained.
Fast blinking red N / A Security Gateway contacted, VPN setup in progress. The unit has acquired at least one satellite and trying to acquire at least 4 to attain position fix. N / A
Slow blinking red N / A VPN tunnel successfully established and configuration in progress, or configuration update in progress. Holdover time exceeded.** In the process of trying to re-acquire at least one satellite to resume GPS timing. N / A
Slow blinking blue N / A Software download in progress. LED stays the same until the unit is ready to restart.*** Holdover.* In the process of trying to re-acquire at least one satellite to resume GPS timing. N / A
Fast blinking blue N / A N / A N / A Indicates traffic activity (voice or data) on the unit.
Solid magenta Internal power failure. Unit is in POST progress. GPSR Communication failure alarm issued. N / A
Solid green N / A 1xRTT is in-service but EvDO is in error. N / A N / A
Slow blinking green N / A Software download in progress. LED stays the same until the unit is ready for a restart.*** N / A N / A
Solid yellow N / A EvDO is in-service but 1x is in error. N / A N / A
Solid yellow N / A Software download in progress. LED stays the same until the unit is ready for a restart.*** N / A N / A

Legend

N / A Not applicable
* GPS Position / time fix attained but now no usable GPS signals.
** Holdover time has exceeded 1 minute.
*** To alert the user that the unit is about to temporarily go out of service. A call in progress is allowed to complete before it goes out of service.

 

Normal progression of LEDs at start up (approximately 10 to 30 minutes)

  1. Power and WAN LEDs are solid blue. System and GPS LEDs are solid red. (1 -2 minutes)
  2. System LED begins flashing fast red; GPS LED is solid red. (1 - 2 minutes)
  3. System LED begins flashing slow red; GPS is solid red. (2 - 3 minutes)
  4. System LED is flashing slow red; GPS LED turns solid blue. (5 - 10 minutes)
  5. System LED continues flashing slow red then turns solid blue (15 - 30 minutes).
isTealiumFlag=true