Register on the Network and Place a Call - Verizon Wireless 3G Network Extender - 1X / EvDO

Warning If Advanced Calling 1.0 (VoLTE) is enabled, ensure it is disabled or turned off. Refer to Enable/Disable Advanced Calling for Network Extender for additional information.

 

Note Notes:

  • A wireless device must be idle (not on an active call) in order to register on the Network Extender.
  • The Network Extender allows up to six active calls. A seventh call channel is reserved to support emergency (E911) calls only.

 

  1. Ensure the wireless device is located within a 15-foot radius of the Network Extender.
    Note Once registered, coverage is extended up to 5,000 square feet (approximately a 39.5 foot radius) depending on home construction and Network Extender placement.
    Note To actively verify that the device is registered, call #48 to verify the connection.
    Network Extender coverage ranges
  2. Dial the 10-digit mobile number then press Send.
    Note A short double tone (beep) heard while placing or receiving a call indicates that the wireless device is under Network Extender coverage.
isTealiumFlag=true