Enable / Disable NDIS (Network Driver Interface Specification) - VZAccess® Manager v7.7 (Windows®)

Note Refer to Enable / Disable the 4G LAN Adapter to enable / disable the 4G adapter.

LAN Adapter - Auto-connect
NDIS mode enabled.
LAN Adapter - Auto-connect except when roaming
NDIS mode enabled except when roaming.
LAN Adapter - Manually connect
NDIS mode disabled.
  1. Launch VZAccess Manager.
    Note From the Windows desktop, navigate: Start > All Programs (Programs) > VZAccess Manager.
    Note For Windows 10, click Start > VZAccess Manager.
  2. If presented, enter the PIN then click OK.
    Note The default PIN is 1111.
  3. Ensure there is no internet connection.
    Note If connected, click Disconnect.
  4. From the top menu, navigate: Options > Preferences.
    Note If not available, navigate: Menu > Options > Preferences.
  5. From the Device connection preference dropdown, select one of the following:
    LAN Adapter - Auto-connect
    NDIS mode enabled.
    LAN Adapter - Auto-connect except when roaming
    NDIS mode enabled except when roaming.
    LAN Adapter - Manually connect
    NDIS mode disabled.
  6. Click OK.
isTealiumFlag=true