Advanced Settings - Verizon Jetpack® 4G LTE Mobile HotSpot - 890L

To change the advanced settings (e.g., LAN, Firewall, etc.) on your Jetpack, view this info.

  1. Access the Admin Web Interface.
  2. From the Home screen, click Basic Setup.
    Click Basic Setup
  3. Configure the following options.
    1. Wi-Fi Network Name
      • If desired, enter a SSID name.
      • Enable Broadcast SSID.
        Note Enabled when a check mark is present.
        Enabled
        Device appears in the list of Available Wireless Networks on the computer or portable device.
        Disabled
        Requires network credentials for access.
      Select an option
    2. Wi-Fi Security Policy
      • Select a Wi-Fi Security Type and the appropriate security settings.
        • None
        • WEP
        • WPA-PSK
        • WPA2-PSK
        • WPA-PSK/WPA2-PSK
      Select an option
    3. Select a Sleep Time option then click Next.
      • 10 Minutes
      • 30 Minutes
      • None
      Select option
  4. Click Apply.
    Click Apply
  5. Click Router.
    Click Router
  6. From the LAN tab, enable the DHCP Server then click Apply.
    Enabled
    Automatically allocates IP addresses to each wireless client.
    Click Apply
  7. Click Firewall.
    Click Firewall
  8. From the VPN tab, enable IP Sec VPN Pass Through then click Apply.
    Enabled
    Allows VPN clients to connect to remote VPN Servers.
    Click Apply
isTealiumFlag=true