Network Mode Settings - Verizon Jetpack 4G LTE Mobile Hotspot - 890L

  1. From the main screen of the device, navigate: Settings > Mobile Network > Network.
    Note Utilize the arrow buttons to highlight and the OK button to select.
  2. Select a network setting (e.g., Global Mode, LTE/CDMA Mode, etc.) then press OK.
    Note The preferred international carrier is automatically selected. You can manually tap an alternate carrier but it may require as many as six registration attempts with that carrier prior to successful registration.
  3. Select back then press OK.

 

Note You can also set the preferred network mode from the Administration Web Interface by doing the following:

  1. From the Network tab, click WWAN.
  2. From the WWAN Settings section, click the "WWAN Preferred Mode" Dropdown menu then select the desired option.
    Note For GSM networks, ensure HSPA only is selected.
  3. Click Save (located in the lower-left).
    Note If HSPA only was selected in step 3, ensure the HSPA/GSM Mode is set to HSPA/UMTS + GSM (GPRS EDGE).
    Note The device restarts.
isTealiumFlag=true