Connect the Wireless Client via WPS - LTE Internet (Installed)

  • Up to 20 WiFi connections are supported.
  • WiFi Protected Setup (WPS) allows new wireless clients to be added without having to enter any wireless setting (network name, wireless key, etc.).
  • The wireless client must support WPS.
     Windows 7 and Windows Vista Vista (SP1) have native WPS support.
  1. Ensure the router is on then press the WPS button.
    Press the WPS button
  2. Start the WPS program on the wireless client.
  3. When the wireless client has successfully registered with the network, the WPS LED will change to solid green.
     If blinking red, the router could not locate the wireless client. Repeat steps 1 and 2 or refer to Connect the Wireless Client Manually.