Configure Port Forwarding - LTE Internet (Installed)

Ensure the router's firewall is set to medium or low security to take advantage of all the port forwarding features. Firewall settings take precedence over port forwarding services. For example, if the firewall is set to Medium Security, Internet Control Message Protocol (ICMP) packets will be blocked even if the ICMP service is enabled. If a port forwarding service is not working, try setting the firewall to a lower security setting.

  1. Access the router configuration main menu.
    Refer to Access the Router Configuration for additional assistance.
  2. From the Top menu, click Firewall Settings.
  3. Click Yes.
  4. From the left menu, click Port Forwarding.

    Create a Rule
    Delete a Rule

 

Create a Rule

  1. From the Create a new port forwarding rule section, select an option from each dropdown (listed below) then click Add.
    IP Address forward to or select from menu
    Specify or select the IP address to forward to
    Application to forward
    Specify or select the application for which the rule is being created

 

 

Delete a Rule
  1. From the Applied rules section, select the rule(s) (under Delete) then click Delete.

 

isTealiumFlag=true