GPS over Wi-Fi - Verizon Jetpack® 4G LTE Mobile Hotspot MiFi 4620L

Note Notes:

  • The GPS over Wi-Fi setting allows the MiFi device to provide a GPS (NMEA) stream to a Windows or Mac computer.
    • This is only useful if running an app that is capable of utilizing a NMEA GPS stream (e.g., Microsoft Streets & Trips, etc.).
  • To utilize GPS over Wi-Fi, a driver must be installed on the computer.

  1. Access the Admin Web Interface.
  2. From the Advanced tab, click Settings.
  3. From the Router section, select GPS over Wi-Fi (NMEA).
    Note Enabled when a check mark is present.
    Note If presented, review the agreement then click Ok to continue.
  4. Click Save.
  5. If GPS over Wi-Fi (NMEA) is enabled, launch the GPS-enabled app on the computer then configure it to utilize a NMEA port or GPS receiver.
    Note Refer to the app's help menu or contact the app developer for assistance.
    Note Once the app has found the NMEA port / GPS receiver, it should report "Waiting for your location" or similar until a GPS fix is obtained. After that, it uses or displays the current GPS location.

Download GPS over Wi-Fi (NMEA) driver

  1. Access the Administration Web Interface.
  2. From the Advanced tab, click Settings.
  3. From the Router and GPS over Wi-Fi (NMEA) sections, click How to use this feature.
  4. From the Driver Installation section, click USB and GPS Driver for Windows then follow the step-by-step instructions to complete installation.

isTealiumFlag=true