Tethered Modem Connection - Verizon Jetpack™ 4G LTE Mobile HotSpot - MiFi® 4620L

To disable the Wi-Fi connectivity on your Jetpack and set up a tethered connection, view this info.

Note To utilize USB tethered mode, a driver must be installed on the computer.

  1. Access the Admin Web Interface.
  2. From the Advanced tab, click Settings.
  3. From the Router section, select USB tethered mode.
    Note Enabled when a check mark is present.
    Router section with USB tethered mode
  4. Click Save.
    Note The device restarts.
  5. Connect the device to the computer using a compatible USB cable then launch a web browser.
    Note If applicable, allow adequate time for the computer to detect the device and install the necessary software.
    Note The device is setup and functions as an ethernet connection (no connection software required).

Top

Download USB driver

  1. Access the Admin Web Interface.
  2. From the Advanced tab, click Settings.
  3. From the Router and GPS over Wi-Fi (NMEA) sections, click How to use this feature.
    Router section and GPS over Wi-Fi (NMEA) section with How to use this feature
  4. From the Driver Installation section, click the appropriate link for download then follow the step-by-step instructions to complete installation.
    • USB and GPS Driver for Windows
    • USB Driver for Mac
    Driver Installation links and instructions

Top

isTealiumFlag=true