Power Saver Settings - Lucid™ by LG

Note When enabled, Power saver mode will disable or modify selected settings upon reaching the specified battery power level.

  1. From a home screen, select Apps (located in the lower-right).
  2. From the Apps tab, select Settings.
  3. From the DEVICE section, select the Power saver.
  4. Select Turn Power saver on.
  5. Select one of the following:
    • Immediately
    • 10% battery
    • 20% battery
    • 30% battery
    • 50% battery
  6. From the POWER SAVER ITEMS section, select any of the following:
    Note Enabled when a check mark Check box icon is present.
    • Auto-sync
    • Wi-Fi
    • Bluetooth
    • Vibrate on touch
    • Brightness
      1. If enabled, select the settings icon Settings icon located to the right.
      2. Select one of the following then select OK:
        • 10% brightness
        • 20% brightness
        • 30% brightness
        • 50% brightness
    • Screen timeout
      1. If enabled, select the settings icon Settings icon located to the right.
      2. Select one of the following:
        • 15 seconds
        • 30 seconds
        • 1 minute
    • Front key light
      1. If enabled, select the settings icon Settings icon located to the right.
      2. Select one of the following:
        • 1.5 seconds
        • Always off
isTealiumFlag=true