Set Up Wi-Fi Connection - Samsung Galaxy Camera®

Note Local area Wi-Fi network information may be needed to complete several steps. Please refer to the network administrator for additional assistance.

Note To setup a Wi-Fi connection, Wi-Fi must be enabled.

  1. From the Home screen, tap Apps (located in the lower-right).
  2. From the APPS tab, tap Settings.
  3. Tap Wi-Fi.
  4. Tap the preferred Wi-Fi network.
    Note If the preferred network is not displayed, refer to Add Network for assistance.
  5. If presented, enter the appropriate Password then tap Connect.
    Note To view the password as it is being entered, tap Show password (enabled when a check mark is present).

 

 

Add Network

  1. Tap Add Wi-Fi Network.
  2. From the Network SSID field, enter the appropriate name.
  3. From the Security field, tap the drop down menu.
  4. Tap the appropriate security option:
    Note If using an Open network (None), skip to step 6.
    • None
    • WEP
    • WPA/WPA2 PSK
    • 802.1x EAP
  5. From the Password field, enter the appropriate password.
    Note To view the password as it is being entered, tap Show password (enabled when a check mark is present).
  6. Ensure additional settings (e.g. EAP method, Phase 2 authentication, CA certificate, etc.) are configured appropriately (if applicable) then tap Save.

 

 

Top

isTealiumFlag=true