Advanced Settings - Verizon Jetpack® 4G LTE Mobile Hotspot MiFi® 5510L

To change the Advanced Settings (e.g., LAN, Port Filtering, etc.) on your Jetpack, view this info.

Caution Changing advanced settings may be harmful to the stability, performance, and security of the Jetpack. Contact your local IT admin prior to altering any of these settings.

  1. Access the Admin Web Interface.
  2. From the left menu, click Jetpack Settings.
  3. From the Advanced tab, click Continue (located on the right).
  4. Click any of the following:

 

Networks

Note For info regarding APN settings, refer to Edit Access Point Name (APN).

  1. Click the "Preferred network technology" Dropdown menu.
  2. Click the appropriate setting:
    • Automatic (4G LTE, CDMA)
    • 4G LTE only
    • CDMA Auto (EVDO, 1xRTT)
    • EVDO only
    • 1xRTT only
  3. Click Save Changes (located in the lower-right).

 

Top

 

Manual DNS

Caution Domain Name Server (DNS) settings are automatically assigned by the device. If enabling manual DNS is necessary, contact your local IT admin for assistance.

  1. To enable, select (check) Enable manual DNS.
  2. From the DNS 1 IP address and DNS 2 IP address fields, enter the appropriate information.
  3. Click Save Changes (located in the lower-right).

 

Top

 

SIM

Note Refer to Enable / Disable / Modify the SIM PIN.

 

Top

 

Firewall

  1. From the VPN Passthrough section, click the ON / OFF switch On / Off switch to enable or disable.
  2. From the UPv6 Transparent Mode section, click the ON / OFF switch to enable or disable.

 

Top

 

LAN

  1. From the IPv4 section, enter the desired info into the following fields:
    • IP address
    • Subnet mask
    • Enable DHCP server
      Note Enabled when a check mark is present.
    • Start DHCP address range at
  2. Click Save Changes (located in the lower-right).

 

Top

 

Port Filtering

  1. From the Port Filtering section, click the ON / OFF switch On / Off switch to enable or disable.
  2. From the Applications section, select the desired app(s).
    Note Selected when a check mark is present.
    Note If the app is not listed, click Add Custom Application (located in the lower-left) then enter the appropriate info.
    Note If disabling Port Filtering, skip to step 3.
  3. Click Save Changes (located in the lower-right).

 


Top

isTealiumFlag=true