Verizon Jetpack® 4G LTE Mobile Hotspot MiFi® 5510L - Wireless Network Security Settings

To view or change network security settings (e.g., Wi-Fi password, number of connected devices) for your Jetpack, see this info.

  1. Access the Admin Web Interface.
  2. From the left menu, click Jetpack Settings.
  3. From the Wi-Fi tab, configure Wi-Fi settings as desired:
    Note Depending upon the selected security type, available options may vary.
    • Display Wi-Fi Name
      Note Enabled when the adjacent switch is set to ON.
    • Display Wi-Fi Password
      Note Enabled when the adjacent switch is set to ON.
    • Wi-Fi name
    • 802.11 Mode
      • 802.11b + 802.11g + 802.11n
      • 802.11g + 802.11n
      • 802.11b + 802.11g
      • 802.11n only
      • 802.11g only
      • 802.11b only
    • Security
      • None
      • WPA2 Personal/PSK
      • WPA/WPA2 Mixed Mode
    • Wi-Fi password
      Caution If the Wi-Fi Password is changed, the network settings on the computer must updated. For assistance, select the appropriate operating system:
    • Maximum Wi-Fi connected devices (1-10)
      Note This option limits the number of devices connected to MiFi® 5510L.
    • Broadcast Wi-Fi name
      Note Enabled when a check mark is present.
    • Wi-Fi privacy separation
      Note Enabled when a check mark is present.
    • Wi-Fi Multimedia (WMM)
      Note Enabled when a check mark is present.
    • Channel (Automatic, 1-11)
    • Wi-Fi range
      • Short range - longer battery life
      • Long range - shorter battery life
  4. Click Save Changes (located in the lower-right).
isTealiumFlag=true