LED Status Lights - Delphi Connect

Status LED
Status (Engine On)
Status (Engine Off)
No illumination
No vehicle power to device or device failure.
  • Deep sleep occurs after about 6 days idle. Start engine or move vehicle to wake up device.
  • No vehicle power to device or Device failure.
Solid White
Vehicle Diagnostics Not Activated on Verizon network.
Vehicle Diagnostics Not Activated on the Verizon network.
Solid Blue
Vehicle Diagnostics waiting for first-time vehicle setup after plug-in.
Vehicle Diagnostics waiting for first-time vehicle setup after plug-in.
Solid or
Blinking Green
On Verizon Network
  • Idle / dormant (3 blinks every 30 seconds)
  • Ready, no data activity (solid green)
  • Data activity (blink with data activity)
On Verizon Network
  • Ready, no data activity (solid green)
  • Data activity (blink with data activity)
Solid or
Blinking Yellow
On Roaming Network
  • Idle / dormant (3 blinks every 30 seconds)
  • Ready, no data activity (solid yellow)
  • Data activity (blink with data transfer)
On Roaming Network
  • Ready, no data activity (solid yellow)
  • Data activity (blink with data transfer)
Solid Red
No Wireless Service
N/A
Blinking Red
  • Transmitting key fob Command to Vehicle (2 blinks)
  • User-initiated vehicle scanning in process (1 blink per second)
  • Transmitting key fob Command to Vehicle (2 blinks)
  • User-initiated vehicle scanning in process (1 blink per second)
Blinking Blue
Bluetooth® Pairing in Progress
(blinking once per second for one minute)
  • Engine Off-Light sleep (blinking once every 10 seconds)
  • Bluetooth® Pairing in Progress (blinking once per second for one minute)
Blinking White
Activation or firmware update in Progress
CAUTION: DO NOT UNPLUG
Activation or firmware update in Progress
CAUTION: DO NOT UNPLUG


 

LED Status - Possible failure reason - Recommended action
 
 
No LED illumination
Vehicle Diagnostics is in deep sleep Start engine, wait up to 10 seconds for LED to illuminate any color
No power at OBD port Check that Vehicle Diagnostics is fully plugged into OBD port.
Check that fuse for OBD port is not blown (see vehicle owner manual for proper fuse).
Check that no pins are bent or missing from Vehicle Diagnostics connector or OBD port.
Defective Vehicle Diagnostics Replace Vehicle Diagnostics.
LED remains white Vehicle Diagnostics cannot provision on Verizon network Ensure vehicle is in a Verizon coverage area.
Ensure your Verizon account is active (call *611 from your Verizon cell phone or (800) 922-0204)
LED remains solid blue Device cannot complete vehicle setup Check all OBD port connectors on Vehicle Diagnostics and vehicle for dirty / corroded pins
Vehicle may be incompatible. Check fitment guide (http://connectedcar.delphi.com/fitment)
isTealiumFlag=true