Set Up Device - BlackBerry® Z10

If you need to transfer contacts and media from one device to another, follow these step-by-step instructions before activating the new device.

Caution To avoid potential issues, review the following:

  • Accounts (e.g., Gmail, email, etc.) should be set up after activating the device (see Related Topics).

 

  1. Ensure that the device is powered on.
    Note If powered off, allow several minutes for the start up process to complete.
  2. From the 'Welcome to BlackBerry!' screen, swipe left to continue.
  3. Review the license agreement then tap I agree (located in the lower-right) to continue
  4. From the 'Connect to Wi-Fi' screen, swipe left to skip.
  5. From the 'BlackBerry ID' screen, swipe left to skip.
  6. If a software update is available, select (e.g., Update, Set Up Wi-Fi, etc.).
    Note If utilizing the Verizon Wireless Mobile Network, proceed to step 7.
  7. From the 'Configuration Complete' screen, swipe left to continue.
  8. From the 'Essential Gestures' screen, swipe left to continue.
  9. From the 'Gesture #1' screen, swipe left to continue.
  10. From the 'Gesture #2' screen, swipe left to continue.
  11. From the 'Tip' screen, swipe left to continue.
  12. From the 'Basic Setup Finished' screen, swipe up from the bottom of the display to continue.

 

Related Topics:

isTealiumFlag=true