Remove SD / Memory Card - Casio G'zOne Commando® 4G LTE

Note This device supports microSD (TransFlash) memory cards. MicroSD cards can be purchased from any Verizon Wireless retail store or at the online store.

  1. From a home screen, tap the Apps tab Home Screen select Apps tab (located at the bottom).
  2. Tap Settings.
  3. Tap Storage.
  4. Tap Unmount SD / Memory Card.
    Note If presented with 'unmounting the SD / Memory Card may stop some applications from functioning', tap OK.
  5. Unlock the battery cover.
    Note Slide the switch to the free position.
    Unlock battery cover
  6. Remove the battery cover.
    Note Starting from the top right of the device, carefully detach the cover as shown.
    Remove battery cover
  7. Slide the orange bar to 'Free' and insert your finger in the groove to remove the battery.
    Note The orange slide bar must be set to Free (right) to lift the battery from the compartment.
    Remove battery
  8. Remove the memory card.
    Note If applicable, refer to Insert the Memory Card.
    Remove memory card
  9. Insert the battery as shown.
    Note Ensure that the connectors on the battery align with the connectors on the device.
    Insert battery
  10. Slide the battery lock to Lock (left) as shown.
    Battery Lock select Lock (left)
  11. Replace the battery cover.
    Note Insert the cover into the slots (1) and then press the battery cover in the direction of the arrow (2).
    Replace battery cover
  12. Lock the battery cover into place.
    Note Press down at each arrow point.
    Lock battery cover into place
  13. Lock the battery cover.
    Note Slide the switch to the lock position (down).
    Lock battery cover