Advanced Settings - Verizon Ellipsis™ Jetpack® MHS700L

To change the Advanced Settings (e.g., LAN, Port Filtering, etc.) on your Jetpack, view this info.

Caution Changing advanced settings may be harmful to the stability, performance and security of the Jetpack. Contact your local IT administrator prior to altering any of these settings.

  1. Access the Admin Web Interface.
  2. From the left menu, click Jetpack Settings.
  3. From the Advanced tab, click Continue.
  4. Click any of the following:

 

Manual DNS

Caution You may automatically assign Domain Name Server (DNS) settings by the device. If enabling manual DNS is necessary, contact your local IT administrator for assistance.

  1. To enable, select ON for Enable manual DNS.
  2. From the DNS 1 IP address and DNS 2 IP address fields, enter the appropriate information.
  3. Click Save Changes (in the lower-right).

 

Top

 

SIM

Refer to Enable/Disable/Modify the SIM PIN.

 

Top

 

Firewall

  1. From the VPN Pass through mode section, select the ON/OFF switch to enable or disable.
  2. From the IPv6 Transparent Mode section, select the ON/OFF switch to enable or disable.
  3. Click Save Changes (in the lower-right).

 

Top

 

LAN

  1. Enter the desired information into the following fields:
    • IP address
    • Subnet mask
    • Enable DHCP server by selecting the ON/OFF switch to enable or disable.
    • DHCP address range
    • Enable IPv6 by selecting the ON/OFF switch to enable or disable.
  2. Click Save Changes (in the lower-right).

 

Top

 

Port Filtering

  1. From the DMZ field, select the ON/OFF switch to enable or disable.
    Note Enter your desired IP addresses in the DMZ IP address field.
  2. From the Port Filtering field, select the ON/OFF switch to enable or disable.
    Note Select a check mark next to the apps that you wish to allow.
    Note If the app is not listed, click Add Custom Application (in the lower-left) then enter the appropriate information.
    Note If disabling Port Filtering, skip to step 3.
  3. Click Save Changes (in the lower-right).

 

Top

isTealiumFlag=true