Configure Broadcast Settings - Mobile / Wi-Fi Hotspot - Samsung Galaxy Tab® 2 (10.1)

If you are experiencing connectivity issues with your Mobile Hotspot or your device isn't found, check out the steps below.

Note To avoid interference with other Wi-Fi networks, try using non-overlapping channels (i.e., 1, 6, or 11).

  1. Launch Mobile Hotspot.
  2. Select Configure.
    Mobile Hotspot confirmation screen, OK
  3. Select Show advanced options to configure the broadcast channel then select Save.
    Note Enabled when a checkmark is present.
    • Auto (default setting) is recommended.
    • Select an alternate channel (e.g., 1-11, 153, 157, 161, 165).


Note Check out these FAQs for additional support on Mobile Hotspot.