Wired Connection - LMT Port - 4G LTE Network Extender for Enterprise

The 4G LTE Network Extender for Enterprise is an advanced business solution that's not available for consumer use.

Note Notes:

  • The Network Extender is designed to be plug-and-play on most networks, the configuration console allows for custom functionality.
  • The PC must have Internet Explorer 9 and above to access the web Interface.
  • Configuration console links to external resources are not available while connected via the LMT port.

 

  1. From the connection side of the Network Extender, connect the supplied ethernet cable from the Network Extender LMT Port to an available Ethernet port on the computer.
    Wired connection to LMT Port
  2. Open Network Connections.
    Note Navigate: Start > (Settings if present) > Control Panel > View network status and tasks (Network and Sharing Center if present) > Manage network connections.
    Note Alternatively Navigate: Start > Run, enter CMD then press the Enter key > Enter NCPA.CPL then press Enter.
    Note Alternatively Navigate: Start > Run, enter CMD then press the Enter key > Enter CONTROL NETCONNECTIONS then press Enter.
  3. Right-click Local Area Connection then click Properties.
    Note Alternatively, right-click on Ethernet connection then click Properties.
  4. From the General tab, ensure Internet Protocol Version 4 (TCP / IPv4) is selected then click Properties.
  5. Ensure "Use the following IP address" is selected, enter the following settings then click OK.
    IP Address
    192.168.32.28
    Subnet mask
    255.255.255.0
    Warning Typically the setting must be changed back to "Obtain an IP address automatically" to get back onto your company's network or any network that requires DHCP.
  6. Launch a web browser then navigate to https://192.168.32.27.
    Note If presented with a security certificate message, click " " to access the configuration console.
  7. From the Network Extender configuration console, click Sign In Sign in/out icon (located in the upper-right)
  8. Enter the admin password then click Sign In.
    Note Default password: enterpriseFemt0 (zero at end) and is case sensitive.
isTealiumFlag=true