GPS over Wi-Fi - Verizon Jetpack® 4G LTE Mobile Hotspot - AC791L

Note Notes:

  • The GPS over Wi-Fi setting allows the device to provide a GPS (NMEA) stream to a Windows or Mac computer.
    • This is only useful if running an app that is capable of utilizing a NMEA GPS stream (e.g., Microsoft Streets & Trips, etc.).
  • To utilize GPS over Wi-Fi, a driver must be installed on the computer.

 

  1. Access the Admin Web Interface.
  2. From the left menu, click Jetpack Settings.
  3. From the Jetpack tab, click GPS.
  4. Slide the switch to turn ON or OFF .
    Note If presented, review the agreement and click "I Agree" (checked) then click "Yes, proceed" to continue.
  5. Click Save (located on the bottom).
    Note The save option only appears once a change is made.
  6. If GPS over Wi-Fi (NMEA) is on, launch the GPS-enabled app on the computer then configure it to utilize a NMEA port or GPS receiver.
    Note Refer to the app's help menu or contact the app developer for assistance.
    Note Once the app has found the NMEA port / GPS receiver, it should report "Waiting for your location" or similar until a GPS fix is obtained. After that, it uses or displays the current GPS location.

 

Download GPS over Wi-Fi (NMEA) driver

  1. Access the Administration Web Interface.
  2. From the left menu, click Jetpack Settings.
  3. From the Jetpack tab, click GPS.
  4. Click the Download 'GPS over Wi-Fi' Drivers button.
  5. Locate the file in the downloads folder of your computer to complete installation. 
isTealiumFlag=true