Configure Network Settings - 4G LTE Network Extender

Note Notes:

  • Dynamic Host Configuration Protocol (DHCP) is the default network setting.
  • For advanced network configuration refer to IT Department / ISP for assistance.


  1. Access the Network Extender Admin then click Settings Settings icon (on the left).
    Note For assistance, refer to Access Network Extender Admin.
  2. Click Network, then ensure the DHCP box is not checked and modify the following information as needed.
    Note Alternatively, click Clear Network Settings to restore the default settings.
    • Default Gateway
    • IP Address
    • Subnet Mask
    • Primary DNS
    • Secondary DNS
    • Backhaul Limit
    • MTU Size
    Settings - Network configured using DHCP
  3. Click Save.
  4. From the Warning prompt, click OK.
  5. From the Information prompt, click OK.