Insert SIM - Wireless Home Phone T2000

Caution Do not attempt to insert the SIM card while the device is powered on. Doing so may harm the SIM card and/or the device.

Note The Wireless Home Phone T2000 comes with the SIM card installed.

  1. Ensure the device is powered off.
  2. Remove the battery cover.
    Remove the battery cover
  3. Disconnect the battery cable then remove the battery.
    Remove battery
  4. With the gold contacts facing down, align the card (notch first) then gently push the card in until it clicks into place.
    Note The following image is showing the physical location of the SIM tray and is for informational purpose only.
    SIM tray
  5. Connect the battery cable to the socket on the device then insert the battery as shown.
    Connect the battery
  6. Replace the battery cover.
    Close the battery cover


Related Topic: Remove the SIM Card