Samsung Galaxy J3 V / Galaxy J3 (3rd Gen.) - Insert SD / Memory Card

Note Notes:

  1. Ensure the device is powered off.
  2. Using the notch (located on the upper-right edge, when the device is face down) gently lift and remove the battery cover.
    Remove battery cover
  3. Locate the notch in the lower-right corner of the battery then lift the battery out.
    Note If applicable, refer to Insert the Battery.
    Remove battery
  4. Insert the card as shown (gold contacts facing down).
    Insert memory card
  5. Align the gold battery contacts with the contacts in the battery compartment then gently press the battery into place.
    Insert battery
  6. Align the battery cover then gently press to snap the cover into place.
    Replace battery cover

Note Check out these interactive demos (J3 V or J3) for more info.

Related Topic: Remove SD / Memory Card