Verizon Jetpack® MiFi® 8800L - Configure Broadcast Settings

To change the Wi-Fi broadcast settings for your Jetpack, follow these steps.

Note To avoid interference with other Wi-Fi networks, try using non-overlapping channels (i.e., 1, 6, or 11).

  1. Access the Admin Web Interface.
  2. Click Wi-Fi.
  3. From the Settings tab, select the desired option for your Primary and Guest networks:
    • 2.4GHz Band
    • 5GHz Band
    • Off
  4. For the 2.4 GHz Band Settings, click the Channel dropdown then select the desired channel (e.g., Automatic, 1, 2, 10, 11, etc.).
  5. For the 5GHz Band Settings, click the dropdown for any of the following:
    • 802.11 Mode
    • Bandwidth
    • Channel
  6. Click Save Changes.

Note You can also set the band for your Primary and Guest Wi-Fi networks from the device by navigating: Menu > Wi-Fi > Band Selection.