moto g7 power - Set Up Fingerprint Recognition

Note Notes:

  • A fingerprint is utilized to unlock the device.
  • For the fingerprint scanner to operate, hands must be clean and free of moisture, dirt, oil, lotion, dyes, etc.
  • Up to 5 fingerprints can be registered on the device.
  • A screen lock must be active (e.g., PIN, pattern, etc.) to use fingerprint. If necessary, refer to Set Up Screen Lock for assistance.


  1. From a Home screen, swipe up to access all apps.
  2. Navigate: Settings Settings icon > Security & location Security and Location icon.
  3. From the Device Security section, tap Fingerprint then SET UP.
    Note If presented, enter the current PIN, password, or pattern.
  4. Place your finger on the sensor (back) until it vibrates then lift.
    Note Repeat this step as necessary until the process is complete.
    Note For greater accuracy, finger placement should vary slightly each time.
  5. Tap DONE.


Related Topics: