Alcatel GO FLIP™ V - Remove SD / Memory Card

Note This device supports microSD (TransFlash) memory cards. Memory cards can be purchased from any Verizon store or at the online store.

  1. Ensure the device is powered off.
  2. Remove the battery cover.
    Note With the phone facing down, insert your fingernail into the cutout located on the bottom of the battery cover to lift and remove.
    Use notch to remove battery cover
  3. Utilizing the notch, lift then remove the battery.
    Use notch to remove battery
  4. Remove the SD / memory card by sliding it to the left.
    Note If necessary, press down on the latch to remove the SD / memory card.
    Remove sd / memory card
  5. Insert the battery.
    Note Ensure the 3 arrows are pointing to the bottom of the device and the gold contacts line up, then press down gently..
    Insert Battery
  6. Replace the battery cover. 
    Note Press down along the edges to lock into place.


Related Topic: Insert SD / Memory Card