ZTE Blade™ Vantage 2 - Configure Broadcast Settings - Mobile / Wi-Fi Hotspot

If you are experiencing connectivity issues with your Mobile Hotspot or your device isn't found, check out the steps below.

Note To avoid interference with other Wi-Fi networks, try using non-overlapping channels (i.e., 1, 6, or 11).

  1. From a Home screen, swipe up from the center of the display to access the apps screen.
  2. Navigate: Settings Settings icon > Network & internet.
  3. Tap Mobile Hotspot.
  4. Tap Set up Mobile Hotspot.
  5. Tap 802.11 Mode then select a mode (b/g, g only, b/g/n)
  6. Tap Channel then select a channel (1-11 or Auto).

 

Note Check out these FAQs for additional support on Mobile Hotspot.

isTealiumFlag=true