Send Contact via Bluetooth® - CASIO® G'zOne Rock™

Note The receiving device must be visible for pairing and support Object Push.

  1. From the main screen, navigate: MENU > Bluetooth.
    Note Utilize the 5-way navigation pad to highlight and the center of the 5-way navigation pad select.
  2. Highlight 'Add New Device' then select OK.
    Note If promoted to turn Bluetooth on, select Yes then select OK.
    Note If the receiving device appears in the list (indicating that it has already been paired), skip to step 8.
  3. Select OK.
  4. Highlight the desired device then select PAIR.
  5. Verify the device code / Passkey is the same on both devices, select Yes then select OK.
    Note If prompted, enter the default passkey of 0000 (four zeros) then select OK.
    Note Follow the instructions on the device receiving the contact.
  6. Highlight 'Always Ask' then press then select OK.
  7. Press the End key.
  8. Press the Right soft key to select Contacts.
  9. Press the Right soft key to select Options.
  10. Highlight 'Send Name Card' then select OK.
  11. Highlight the desired contact, highlight MARK then press the Left soft key to select Done.
  12. Highlight the desired device then select OK.
isTealiumFlag=true