Windows® Device Manager Conflicts - Casio G'zOne Commando®

Start Device Manager.

  • Windows 10
    • Right-Click Start > Device Manager.
  • Windows 8
    • Right-Click Start Screen > All Apps > Control Panel > System and Security > Device Manager.
  • Windows 7
    • Click Start > Control Panel > System and Security > Device Manager.

For detailed instructions and older operating systems, refer to Opening Windows Device Manager.

The following devices are normally installed:
Note Depending upon the selected USB connection (e.g., Mass Storage, Media Sync, Charge only), some of the devices may not appear.

Android Phone
CASIO C771 Android ADB Interface
Disk drives
CASIO C771 Storage USB Device
Portable Devices
E:\ (drive letter may vary)
CASIO C771 USB Virtual Serial Port (COMx)
Universal Serial Bus controllers
CASIO C771 USB Composite Device
USB Mass Storage Device
MTP USB Device

Note If a red X, yellow ! or yellow ? is displayed to the left of a listed device, a conflict is present and the drivers must be updated or reinstalled.
Note Driver conflicts may also be indicated by a device entry labeled Other Devices or Unknown.

If a conflict is present:

  1. Right-click the device then click Update Driver Software.
  2. Click Browse my computer for driver software.
  3. Enter C:\Windows\System 32\Drivers in the search field then click Next.
    Note The driver location can be entered manually or navigated to by clicking Browse.
    Note If the driver software is not found, a Windows Operating System update may be needed.
  4. Click Close.