LAN Settings - Verizon Jetpack® 4G LTE Mobile Hotspot MiFi® 5510L

View this info to configure advanced LAN settings (e.g., IP address, Subnet mask, DHCP address range, etc.) for your Jetpack.

Caution Changing advanced settings may be harmful to the stability, performance, and security of the Jetpack. Contact your local IT administrator prior to altering any of these settings.

  1. Access the Admin Web Interface.
  2. From the left menu, click Jetpack Settings.
  3. From the Advanced tab, click Continue (located on the right).
  4. Click LAN.
  5. From the IPv4 section, enter the desired information into the following fields:
    • IP address
    • Subnet mask
    • Enable DHCP server
      Note Enabled when a check mark is present.
    • Start DHCP address range at
  6. Click Save Changes (located in the lower-right).
isTealiumFlag=true