Change Device Password - Samsung Galaxy Note® 10.1

Note If using Microsoft® Exchange / Corporate sync, some screen lock options may be unavailable.

  1. From a Home screen, navigate: Apps icon Applications icon > Settings > Lock screen.

 

Swipe

Swipe screen to unlock device

 

Top

 

Face Unlock

Note Facial recognition is utilized to access the device.

  1. After reviewing the Warning, tap Next.
  2. Tap Set it up.
  3. Tap Continue.
  4. Position face within the provided area.
    Note Hold still for several seconds to allow image capture.
  5. Tap Continue.
  6. Select one of the following:
    Pattern
    PIN

 

Top

 

Face and voice

Note Face and voice are utilized to unlock the device.

  1. Tap Next.
  2. Tap Set it up.
  3. Tap Continue.
  4. Position face within the provided area.
    Note Hold still for several seconds to allow image capture.
  5. Tap Continue.
  6. While holding the device 7-12 inches from mouth, tap the Microphone icon Microphone icon then speak the preferred word or phrase 4 times.
    Note Use three to 5 syllables and maintain a constant pitch.
  7. Tap Done.
    Note To assure higher security:
    1. Tap Adapt voice.
    2. While holding the device 7-12 inches from mouth, tap the Microphone icon then speak the preferred word or phrase 6 times.
    3. Tap Done.
  8. Select one of the following:
    Pattern
    PIN

 

Top

 

Pattern

Note An unlock pattern is created then utilized to access the device.

  1. Tap Next.
  2. Draw an unlock pattern (connecting at least 4 dots) then tap Continue.
  3. Draw the same pattern again then tap Confirm
  4. If presented, tap OK.

 

Top

 

PIN

Note A PIN is created then utilized to access the device.

  1. Enter a numeric PIN (4 to 16 digits) then tap Continue.
  2. Re-enter the numeric PIN then tap OK.
  3. If presented, tap OK.

 

Top

 

Password

Note A password is created then utilized to access the device.

  1. Enter a password (4 to 16 characters) then tap Continue.
  2. Re-enter the password then tap OK.

 

Top

isTealiumFlag=true