Mobile Hotspot Settings - BlackBerry® Q10

  1. From the home screen, select Settings.
    Note If not available, swipe down from the top of the display (where the time is located).
  2. Select Network Connections.
  3. Select Mobile Hotspot.
  4. Select Configure (located at the bottom).
  5. Configure the following then select Save (located in the upper-right):
    Note To restore default Mobile Hotspot settings, select Restore Defaults (located at the bottom).
    • Name
      Note This is the Network SSID.
    • Security Type
      • WPA2 Personal
      • WPA/WPA2 Personal
      • WEP
      • None
    • Password
      Note To view the password, select Show password (eye icon located on the right).
    • Band Type
      • 802.11g
      • 802.11bg
    • From the 'Inactivity Timer' section, adjust the timer level.
      Note Touch and hold the indicator then drag to the desired position.
      Note If there is no traffic to or from the mobile network, your Mobile Hotspot session ends after this time. If your device is plugged into a power source, this timer has no effect. Some networks may override your inactivity timer settings.
    • Select the 'Allow connected devices to exchange data with each other' On/Off switch.
      • On (Enabled)
      • Off (Disabled)
isTealiumFlag=true