LAN Settings - Verizon Ellipsis® Jetpack® MHS700L

View this info to configure advanced LAN settings (e.g., IP address, Subnet mask, DHCP address range, etc.) for your Jetpack.

Caution Changing advanced settings may be harmful to the stability, performance and security of the Jetpack. Contact your local IT administrator prior to altering any of these settings.

  1. Access the Admin Web Interface.
  2. From the left menu, click Jetpack Settings.
    Home Page select Jetpack Settings
  3. From the Advanced tab, click Continue.
    Jetpack Settings Advanced select Continue
  4. Click LAN.
    Jetpack Settings Advanced select LAN
  5. Enter the desired info into the following fields:
    • IP address
    • Subnet mask
    • Enable DHCP server by selecting the ON/OFF switch to enable or disable.
    • DHCP address range
    • Enable IPv6 by selecting the ON/OFF switch to enable or disable.
    Jetpack Settings Advanced LAN select the fields and enter the desired information
  6. Click Save Changes (located in the lower-right).
    Jetpack Settings Advanced LAN select Save Changes
isTealiumFlag=true