Transfer Data via SmartShare Beam™ - LG G Pad 8.3 LTE

Note Notes:

  • To utilize the DLNA/SmartShare app, an active Wi-Fi connection must be established and the SmartShare settings may be adjusted as desired. Refer to the following for assistance:
  • To share media with other devices (e.g. computer, TV, etc.), they must be connected to the same Wi-Fi network and may need to be configured for sharing. Refer to the equipment manufacturer for assistance.


  1. From a home screen, navigate: Apps Verizon folder icon > Settings Settings icon.
  2. From Settings, tap Share & connect Share and connect icon.
  3. From the Wireless Networks section, tap Share & connect.
  4. From Data/Media Share, tap SmartShare Beam.
    Note Tap the SmartShare Beam On/Off switch to enable On indicator (located in the upper-right).
  5. Tap your tablet name to rename then tap Save.
  6. Tap Storage then tap the desired option.
    • Internal storage
    • SD card
  7. Tap Auto-accept requests to enable or disable.
    Note Enabled when a check mark Check box icon is present.
  8. Tap Timeout then tap the desired option.
    • 5 minutes
    • 10 minutes
    • 15 minutes
    • Off
  9. To verify the transfer(s), tap File transfer history.