Set Up Screen Lock - Kyocera DuraForce PRO with Sapphire Shield

Note Notes:

  • If using Microsoft® Exchange / Corporate sync, some screen lock options may be unavailable.
  • These steps can also be utilized to change your current screen lock setting.

 

  1. From a Home screen, navigate: Apps icon Apps icon > Settings Settings icon.
  2. Tap Lock screen.
    Note If prompted to add a Google account: Note If presented, enter the current PIN, password or pattern.
  3. Tap Screen lock type.
  4. Tap one of the following:

 

Swipe

Swipe the Lock icon up to unlock the device.

 

Top

 

Pattern

Note An unlock pattern is created to access the device.

  1. Draw an unlock pattern (connecting at least 4 dots) then tap Continue.
  2. Draw the same pattern again then tap Confirm.
  3. If presented, select a notifications option then tap Done (located in the lower-right).
    • Show all notification content
    • Hide sensitive notification content
    • Don't show notifications at all

 

Top

 

PIN

Note A PIN is created to access the device.

  1. If presented with the "PIN policy" screen, tap OK.
  2. Enter a numeric PIN (4 to 16 digits) then tap Continue.
  3. Re-enter the numeric PIN then tap OK.
  4. If presented, select a notifications option then tap Done (located in the lower-right).
    • Show all notification content
    • Hide sensitive notification content
    • Don't show notifications at all

 

Top

 

Password

Note A password is created to access the device.

  1. If presented with the "Password policy" screen, tap OK.
  2. Enter a password (4 to 16 characters) then tap Continue.
  3. Re-enter the password then tap OK.
  4. If presented, select a notifications option then tap Done (located in the lower-right).
    • Show all notification content
    • Hide sensitive notification content
    • Don't show notifications at all

 

Top

 

Fingerprint

Note Notes:

  • A fingerprint is utilized to unlock the device.
  • For the fingerprint scanner to operate, hands must be clean and free of moisture, dirt, oil, lotion, dyes, etc.
  • Up to four fingerprints can be registered on the device.

 

  1. Tap Continue.
  2. If prompted, select a backup screen lock method then set it up.
    • Pattern
    • PIN
    • Password
  3. Tap Next.
  4. Place your finger on the sensor until it vibrates then lift.
    Note Repeat this step as necessary until the process is complete.
    Note For greater accuracy, finger placement should vary slightly each time.
  5. Enter a name for the finger print then tap Done.

 

Top

isTealiumFlag=true